Contact Us
TEL: +86-579-85605715
Fax: +86-579-85605715
E-mail: sabretacsupply@hotmail.com
Address: Zhejiang Yiwu 301 Room, 2 Unit No.62, 2 District Of Tongdian, Choujiang Stree
Home > Knowledge > Content
How to fine adjustment Riflescope
Sep 30, 2018

When using the calibration, we have to pay attention to a problem. When using the fine adjustment knob, because the adjustment tube is supported by a fixed spring piece, the other two points are the high and low knobs and the left and right knobs, two points of force, high and low knobs. Adjustment, when the pressure changes, it also produces a dispersing force relative to the left and right knobs. Although it is small, it also affects the left and right precision of the light sight. Similarly, adjusting the left and right knobs also produces a relatively high level of accuracy. In particular, after the light sight is used for a period of time, the spring piece supporting the return position may be in an unstable state due to the fatigue of the force. That is to say, after correcting the high and low precision and returning to zero, and then correcting the left and right precision to zero, it is found that the high and low precision returns to zero and is wrong.


Therefore, when the player actually uses it, the position of the light sighting seat is generally strictly controlled, and the adjustment range of the fine adjustment knob of the light sight is minimized, so as to avoid a large stress with respect to the other knob. Another point is that according to the regular needs of the actual hunting, it is possible to accurately grasp the zero return distance of the light sight and adjust the light sight. When adjusting the light sight, both the height and the left and right knobs should be adjusted at the same time. When adjusting, the adjustment should be reversed. That is to say, if the height is low, then the knob should be threaded, the left and right knobs should be retracted, and the number of retracted silk threads should be less. If the height is high, then the knob should be retracted, and the left and right knobs should be threaded. The number of incoming wires should be less! When the left and right adjustment knobs are adjusted, the high and low knobs are adjusted.


This requires repeated testing, and the accuracy of shooting will naturally increase.


Previous: How to use the super wide-angle sight

Next: Picatinny rail